Publicaciones
Producció científica
1 a 50 de 525 resultats
-
Experimental analysis of manufacturing parameters’ effect on the flexural properties of wood-PLA composite parts built through FFF
Damous Zandi, M.; Jerez, R.; Lluma, J.; Roa, J.J.; Travieso-Rodríguez, J.A.
International journal of advanced manufacturing technology
p. 1-14
DOI: 10.1007/s00170-019-04907-4
Data de publicació: 2020-01-02
Article en revistaCarregant...
-
Design of a prototype for the in situ forming of a liquid infused preform (ISFLIP) process
Juan, J.; Salan, N.; Silva, A.; Tornero, J.
Journal of mechanical design
Vol. 142, num. 1, p. 015001 / 1-015001 / 8
DOI: 10.1115/1.4044107
Data de publicació: 2020-01
Article en revistaCarregant... -
Surface patterning of cemented carbides by means of nanosecond laser
Fang, S.; Pérez, V.; Salan, N.; Bähre, D.; Llanes, L.
Materials and manufacturing processes
Vol. 35, num. 2, p. 123-129
DOI: 10.1080/10426914.2019.1628268
Data de publicació: 2020
Article en revistaCarregant... -
Carbon addition effects on microstructure and small-scale hardness for Ti(C,N)-FeNi cermets
Besharatloo, H.; Nicolás, M.; Wheeler, J.M.; Mateo, A.; Ferrari, B.; Gordo, E.; Llanes, L.; Roa, J.J.
International journal of refractory metals and hard materials
Vol. 85, p. 105064:1-105064:9
DOI: 10.1016/j.ijrmhm.2019.105064
Data de publicació: 2019-12-01
Article en revistaCarregant... -
Mechanical properties of 3D-printing polylactic acid parts subjected to bending stress and fatigue testing
Travieso-Rodríguez, J.A.; Jerez, R.; Lluma, J.; Traver, O.; Gomez, G.; Roa, J.J.
Materials
Vol. 2019, num. 12, p. 1-20
DOI: 10.3390/ma12233859
Data de publicació: 2019-11-22
Article en revistaCarregant...
-
Fabrication and tribological performance of a laser-textured hardmetal guiding stone for honing processes
Fang, S.; Klein, S.; Hsu, C.; Llanes, L.; Gachot, C.; Bähre, D.
International journal of refractory metals and hard materials
Vol. 84, p. 105034:1-105034:8
DOI: 10.1016/j.ijrmhm.2019.105034
Data de publicació: 2019-11-01
Article en revistaCarregant... -
Assessment of corrosion-induced changes on the mechanical integrity of cemented carbides at small length scales
Zheng, Y.; Fargas, G.; Besharatloo, H.; Serra, M.; Roa, J.J.; Armelin, E.; Lavigne, O.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 84, p. 105033:1-105033:8
DOI: 10.1016/j.ijrmhm.2019.105033
Data de publicació: 2019-11-01
Article en revistaCarregant... -
WC-base cemented carbides with partial and total substitution of Co as binder: Evaluation of mechanical response by means of uniaxial compression of micropillars
Sandoval, D.A.; Rinaldi, A.; Notargiacomo, A.; Ther, O.; Roa, J.J.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 84, p. 1-8
DOI: 10.1016/j.ijrmhm.2019.105027
Data de publicació: 2019-11-01
Article en revistaCarregant... -
Free-standing faradaic motors based on biocompatible nanoperforated poly(lactic acid) layers and electropolymerized poly(3,4-ethylenedioxythiophene)
Molina, B.G.; Cuesta, S.; Besharatloo, H.; Roa, J.J.; Armelin, E.; Aleman, C.
ACS applied materials and interfaces
Vol. 11, num. 32, p. 29427-29435
DOI: 10.1021/acsami.9b08678
Data de publicació: 2019-08-14
Article en revistaCarregant... -
Geometrically necessary dislocations on plastic deformation of polycrystalline TRIP steel
Roa, J.J.; Suárez, S.; Guitar, A.; Fargas, G.; Mateo, A.
Crystals
Vol. 9, num. 6, p. 1-7
DOI: 10.3390/cryst9060289
Data de publicació: 2019-06-01
Article en revistaCarregant...
-
Atom Probe Tomography investigations on grain boundary segregation in polycrystalline Ti(C,N) and Zr(C,N) CVD coatings
El Azhari, I.; Barrirero, J.; García, J.; Soldera, F.; Llanes, L.; Mücklich, F.
Scripta materialia
Vol. 162, p. 335-340
DOI: 10.1016/j.scriptamat.2018.11.041
Data de publicació: 2019-03-15
Article en revistaCarregant...
-
Microstructure, interfaces and properties of 3YTZP ceramic composites with 10 and 20 vol% different graphene-based nanostructures as fillers
Muñoz, C.; Morales, A.; Rojas, T.; Jimenez-Pique, E.; López, C.; Poyato, R.; Gallardo Lopez, A.
Journal of alloys and compounds
Vol. 777, p. 213-224
DOI: 10.1016/j.jallcom.2018.10.336
Data de publicació: 2019-03-10
Article en revistaCarregant... -
Micromechanical properties of WC-(W,Ti,Ta,Nb)C-Co composites
Sandoval, D.A.; Roa, J.J.; Ther, O.; Tarrés, E.; Llanes, L.
Journal of alloys and compounds
Vol. 777, p. 593-601
DOI: 10.1016/j.jallcom.2018.11.001
Data de publicació: 2019-03-10
Article en revistaCarregant... -
Transmission of plasticity through grain boundaries in a metastable austenitic stainless steel
Mateo, A.; Sapezanskaia, I.; Roa, J.J.; Fargas, G.; Redjaïmia, A.
Metals
Vol. 9, num. 2, p. 234:1-234:2
DOI: 10.3390/met9020234
Data de publicació: 2019-02-01
Article en revistaCarregant...
-
Small-scale mechanical properties of constitutive phases within a polycrystalline cubic boron nitride composite
Besharatloo, H.; Gordon, S.; Rodríguez, T.; Llanes, L.; Roa, J.J.
Journal of the European Ceramic Society
Vol. 39, num. 16, p. 5181-5189
DOI: 10.1016/j.jeurceramsoc.2019.08.023
Data de publicació: 2019-01-01
Article en revistaCarregant... -
Evolution of microstructure and residual stresses in gradually ground/polished 3Y-TZP
Minguela, J.; Slawik, S.; Mücklich, F.; Ginebra, M.P.; Llanes, L.; Mas-Moruno, C.; Roa, J.J.
Journal of the European Ceramic Society
DOI: 10.1016/j.jeurceramsoc.2019.10.057
Data de publicació: 2019-01-01
Article en revistaCarregant... -
Mechanical behavior of PVD coatings deposited on ADI
Colombo, D.; Márquez, A.; Marro, F.G.; Llanes, L.; Sosa, A.
Materia-Rio de Janeiro
Vol. 24, num. 4
DOI: 10.1590/S1517-707620190004.0813
Data de publicació: 2019-01-01
Article en revistaCarregant...
-
Cooperative learning and embedded active learning methodologies for improving students’ motivation and academic results
Perez-Poch, A.; Sánchez-Carracedo, F.; Salan, N.; Lopez, D.
International journal of engineering education
Vol. 35, num. 6, p. 1851-1858
Data de publicació: 2019
Article en revistaCarregant...
-
Surface integrity assessment of laser treated and subsequently coated cemented carbides
Fang, S.; Marro, F.G.; Salan, N.; Cruz, M.; Colominas, C.; Bähre, D.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 83, p. 1-19
DOI: 10.1016/j.ijrmhm.2019.104982
Data de publicació: 2019
Article en revistaCarregant... -
Orientación vocacional en la infancia y aspiraciones de carrera por género
Macias, G.; Caldera, J.; Salan, N.
Convergencia. Revista de ciencias sociales
num. 80, p. 1-23
DOI: 10.29101/crcs.v26i80.10516
Data de publicació: 2018-12
Article en revistaCarregant...
-
Influence of cyclic thermal treatments on the oxidation behavior of Ti-6Al-2Sn-4Zr-2Mo alloy
Fargas, G.; Roa, J.J.; Sefer, B.; Mateo, A.
Materials characterization
Vol. 145, num. November 2018, p. 218-224
DOI: 10.1016/j.matchar.2018.08.049
Data de publicació: 2018-11-01
Article en revistaCarregant... -
Mechanical reliability of dental grade zirconia after laser patterning
Roitero, E.; Anglada, M.; Mücklich, F.; Jimenez-Pique, E.
Journal of the mechanical behavior of biomedical materials
Vol. 86, p. 257-263
DOI: 10.1016/j.jmbbm.2018.06.039
Data de publicació: 2018-10-01
Article en revistaCarregant...
-
Dynamic deformation of metastable austenitic stainless steels at the nanometric length scale
Roa, J.J.; Sapezanskaia, I.; Fargas, G.; Kouiat, R.; Redjaïmia, A.; Mateo, A.
Metallurgical and materials transactions A-Physical metallurgy and material
Vol. 49, num. 12, p. 6034-6039
DOI: 10.1007/s11661-018-4911-x
Data de publicació: 2018-09-17
Article en revistaCarregant...
-
Reversible phase transformation in polycrystalline TRIP steels induced by cyclic indentation performed at the nanometric length scale
Roa, J.J.; Sapezanskaia, I.; Fargas, G.; Kouitat, R.; Redjaïmia, A.; Mateo, A.
Steel research international
Vol. 89, num. 11, p. 1-6
DOI: 10.1002/srin.201800234
Data de publicació: 2018-09-17
Article en revistaCarregant...
-
Mapping of mechanical properties at microstructural length scale in WC-Co cemented carbides: Assessment of hardness and elastic modulus by means of high speed massive nanoindentation and statistical analysis
Roa, J.J.; Phani, P.; Oliver, W. C.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 75, p. 211-217
DOI: 10.1016/j.ijrmhm.2018.04.019
Data de publicació: 2018-09-01
Article en revistaCarregant...
-
Laser surface texturing of a WC-CoNi cemented carbide grade: surface topography design for honing application
Fang, S.; Llanes, L.; Bähre, D.
Tribology international
Vol. 122, p. 236-245
DOI: 10.1016/j.triboint.2018.02.018
Data de publicació: 2018-06
Article en revistaCarregant...
-
Enhanced thermal stability and fracture toughness of TiAlN coatings by Cr, Nb and V-alloying
Chen, Y. H.; Roa, J.J.; Yu, C.; Johansson, M.; Andersson, J.; Anglada, M.; Oden, M.; Rogstrom, L.
Surface and coatings technology
Vol. 342, p. 85-93
DOI: 10.1016/j.surfcoat.2018.02.059
Data de publicació: 2018-05-25
Article en revistaCarregant...
-
The Sequential twinning-transformation induced plasticity effects in a thermomechanically processed high Mn austenitic steel
Eskandari, H.; Zarei, A.; Abedi, H.; Mateo, A.; Roa, J.J.
Materials science and engineering A. Structural materials properties microstructure and processing
Vol. 725, p. 242-249
DOI: 10.1016/j.msea.2018.03.102
Data de publicació: 2018-05-16
Article en revistaCarregant...
-
Investigations on micro-mechanical properties of polycrystalline Ti(C,N) and Zr(C,N) coatings
El Azhari, I.; García, J.; Zamanzade, M.; Soldera, F.; Pauly, C.; Llanes, L.; Mücklich, F.
Acta materialia
Vol. 149, p. 364-376
DOI: 10.1016/j.actamat.2018.02.053
Data de publicació: 2018-05-01
Article en revistaCarregant...
-
Do female motives for enrolling vary according to STEM profile?
Olmedo, N.; Sánchez-Carracedo, F.; Salan, N.; Lopez, D.; Perez-Poch, A.; Lopez, M.
IEEE transactions on education
Vol. 61, num. 4, p. 289-297
DOI: 10.1109/TE.2018.2820643
Data de publicació: 2018-04-16
Article en revistaCarregant...
-
Scale effect in mechanical characterization of WC-Co composites
Sandoval, D.A.; Rinaldi, A.; Tarragó, J.M.; Roa, J.J.; Fair, J.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 72, p. 157-162
DOI: 10.1016/j.ijrmhm.2017.12.029
Data de publicació: 2018-04-01
Article en revistaCarregant... -
Low temperature degradation of laser patterned 3Y-TZP: enhancement of resistance after thermal treatment
Roitero, E.; Ochoa, M.; Anglada, M.; Mücklich, F.; Jimenez-Pique, E.
Journal of the European Ceramic Society
Vol. 38, num. 4, p. 1742-1749
DOI: 10.1016/j.jeurceramsoc.2017.10.044
Data de publicació: 2018-04
Article en revistaCarregant... -
Femtosecond laser multi-patterning of zirconia for screening of cell-surface interactions
Stanciuc, A.; Flamant, Q.; Sprecher, C.; Alini, M.; Anglada, M.; Peroglio, M.
Journal of the European Ceramic Society
Vol. 38, num. 3, p. 939-948
DOI: 10.1016/j.jeurceramsoc.2017.08.019
Data de publicació: 2018-03
Article en revistaCarregant... -
Human primary osteoblast behaviour on microrough zirconia-toughened alumina and on selectively etched microrough zirconia-toughened alumina
Stanciuc, A.; Flamant, Q.; Biotteau, K.; Stoddart, M.; Anglada, M.; Porporati, A.; Kuntz, M.; Gremillard, L.; Alini, M.; Peroglio, M.
Journal of the European Ceramic Society
Vol. 38, num. 3, p. 927-937
DOI: 10.1016/j.jeurceramsoc.2017.06.022
Data de publicació: 2018-03-01
Article en revistaCarregant... -
Strength and fracture toughness of zirconia dental ceramics
Turon-Vinas, M.; Anglada, M.
Dental materials
Vol. 34, num. 3, p. 365-375
DOI: 10.1016/j.dental.2017.12.007
Data de publicació: 2018-03-01
Article en revistaCarregant... -
Implementation of advanced characterization techniques for assessment of grinding effects on the surface integrity of WC-Co cemented carbides
Yang, J.; Roa, J.J.; Schwind, M.; Oden, M.; Johansson-Jõesaar, M.P.; Esteve, J.; Llanes, L.
Powder metallurgy
Vol. 61, num. 2, p. 100-105
DOI: 10.1080/00325899.2018.1436640
Data de publicació: 2018-02-21
Article en revistaCarregant... -
Strength and reliability of WC-Co cemented carbides: understanding microstructural effects on the basis of R-curve behavior and fractography
Tarrago, J.; Coureaux, D.; Torres, Y.; Jimenez-Pique, E.; Schneider, L.; Fair, J.; Llanes, L.
International journal of refractory metals and hard materials
Vol. 71, p. 221
DOI: 10.1016/j.ijrmhm.2017.11.031
Data de publicació: 2018-02
Article en revistaCarregant...
-
Chemical and nanoindentation study of diffusion during sintering of 12Ce-ZrO2/3Y-ZrO2 powder layers
Roa, J.J.; Turon-Vinas, M.; Tovar-Vargas, D.; Ledesma, J.; Anglada, M.
Ceramics international
Vol. 44, num. 2, p. 2485-2490
DOI: 10.1016/j.ceramint.2017.10.226
Data de publicació: 2018-02-01
Article en revistaCarregant... -
Influence of temperature on the biaxial strength of cemented carbides with different microstructures
Chicardi, E.; Bermejo, R.; Gotor, F.; Llanes, L.; Torres, Y.
International journal of refractory metals and hard materials
Vol. 71, p. 82-91
DOI: 10.1016/j.ijrmhm.2017.11.003
Data de publicació: 2018-02
Article en revistaCarregant...
-
Influence of testing mode on the fatigue behavior of austenitic grain at the nanometric length scale for TRIP steels
Roa, J.J.; Sapezanskaia, I.; Fargas, G.; Kouitat, R.; Redjaïmia, A.; Mateo, A.
Materials science and engineering A. Structural materials properties microstructure and processing
Vol. 713, p. 287-293
Data de publicació: 2018-01-24
Article en revistaCarregant...
-
Implementation of advanced characterization techniques for assessment of grinding effects on the surface integrity of WC-Co cemened carbides
Yang, J.; Roa, J.J.; Schwind, M.; Oden, M.; Johansson, M.; Esteve, J.; Llanes, L.
Powder metallurgy
Vol. 61, num. 2, p. 100-105
Data de publicació: 2018
Article en revistaCarregant... -
Effect of calcia co-doping on ceria-stabilized zirconia
Turon-Vinas, M.; Zhang, F.; Vleugels, J.; Anglada, M.
Journal of the European Ceramic Society
Vol. 38, num. 6, p. 2621-2631
DOI: 10.1016/j.jeurceramsoc.2017.12.053
Data de publicació: 2018-01-01
Article en revistaCarregant...
-
Estudio sobre la creatividad relacionada con la habilidad de programadores universitarios
Islas, C.; Carranza, M.Rocio; Perez-Poch, A.; Salan, N.
Revista electrónica de investigación educativa
Vol. 21, num. e34, p. 1-12
DOI: 10.24320/redie.2019.21.e34.2143
Data de publicació: 2018
Article en revistaCarregant...
-
Perfil de las ingenieras TIC versus el de otras mujeres STEM
Olmedo, N.; Sánchez-Carracedo, F.; Salan, N.; Lopez, D.; Perez-Poch, A.; Lopez, M.
Actas de las XXIV Jornadas sobre Enseñanza Universitaria de la Informática
Vol. 3, p. 255-262
Data de publicació: 2018
Article en revistaCarregant...
-
Structural and mechanical properties of Zr1-x Mox thin films: from the nano-crystalline to the amorphous state
Borroto-Ramírez, A.; Bruyère, S.; Thurieau, N.; Gendarme, C.; Jimenez-Pique, E.; Roa, J.J.; Pierson, J.F.; Mücklich, F.; Horwat, D.
Journal of alloys and compounds
Vol. 729, p. 137-143
DOI: 10.1016/j.jallcom.2017.09.153
Data de publicació: 2017-12-30
Article en revistaCarregant... -
Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides
Yang, J.; Roa, J.J.; Schwind, M.; Oden, M.; Johansson-Jõesaar, M. P.; Llanes, L.
Materials characterization
Vol. 134, p. 302-310
DOI: 10.1016/j.matchar.2017.11.004
Data de publicació: 2017-12
Article en revistaCarregant...
-
Evaluation of damage in front of starting notches induced by ultra-short pulsed laser ablation for the determination of fracture toughness in zirconia
Turon-Vinas, M.; Morillas, J.; Moreno, P.; Anglada, M.
Journal of the European Ceramic Society
Vol. 37, num. 15, p. 5127-5131
DOI: 10.1016/j.jeurceramsoc.2017.07.006
Data de publicació: 2017-12-01
Article en revistaCarregant...
-
Nanosecond-laser patterning of 3Y-TZP: damage and microstructural changes
Roitero, E.; Lasserre, F.; Roa, J.J.; Anglada, M.; Mücklich, F.; Jimenez-Pique, E.
Journal of the European Ceramic Society
Vol. 37, num. 15, p. 4876-4887
DOI: 10.1016/j.jeurceramsoc.2017.05.052
Data de publicació: 2017-12
Article en revistaCarregant... -
Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 ceramic composite
Roa, J.J.; Aboulfadl, H.; Barrirero, J.; Turon-Vinas, M.; Mücklich, F.; Anglada, M.
Materials characterization
Vol. 132, p. 83-91
DOI: 10.1016/j.matchar.2017.07.045
Data de publicació: 2017-10-01
Article en revistaCarregant... -
Thermal and mechanical stability of wurtzite-ZrAlN/cubic-TiN and wurtzite-ZrAlN/cubic-ZrN multilayers
Chen, Y. H.; Rogstrom, L.; Roa, J.J.; Zhu, J.; Schramm, I.; Johnson, L.; Schell, N.; Mücklich, F.; Anglada, M.; Oden, M.
Surface and coatings technology
Vol. 324, p. 328-337
DOI: 10.1016/j.surfcoat.2017.05.055
Data de publicació: 2017-09-15
Article en revistaCarregant...
Gestor de referències
BIBTex
Font RSS 
Inserir a una web
QR
Compartir Filtra els resultats
Tipus d'activitat
Activitat en accés obert
Xarxa de col·laboració UPC